UTAS-1056.ACPR
Automatic Marshall Stability Test Machine with U-Touch PRO Control Unit, 50 kN / 11000 lbf capacity
UTAS-1057
Breaking Head (Stability Mould)
for Ø4” Specimen
UTAS-1058
Breaking Head (Stability Mould)
for Ø6” Specimen
UTAS-1063
Indirect Tensile (IDT)Strenght /TSR Test Jig / Lottman Breaking Heads with Ø100mm loading strips.EN, ASTM, AASHTO
UTAS-1064
Pair of Loading Strips for Ø150 mm Bituminous Specimens. EN, ASTM for
UTAS-1063 and UTAS-1066
UTAS-1065E
Pair of Loading Strips for Ø160 mm Bituminous Specimens. EN, for UTAS-1063
UTAS-1066
Indirect Tensile (IDT)Strenght /TSR Test Jig / Lottman Breaking Heads with Ø4” loading strips. EN, ASTM, AASHTO
UTAS-1067A
Pair of Loading Strips for Ø6” Bituminous Specimens. ASTM, AASHTO for UTAS-1066 and UTAS-1066
UTM-1088
Marshall Penetration Piston for Stability Test, for UTAS-1056
EN 12697-34, 12697-23, 12967-12 (Method A) ASTM D1559, D5581, D6927; D6931; AASHTO T245, T283, EN 12697-44; NF P98-251-2
The UTAS-1056.ACPR 50 kN capacity Automatic Marshall Stability Test Machine with U-Touch PRO Control Unit is designed to determine the maximum load and flow values of bituminous mixtures. With suitable accessories UTAS-1056.ACPR can also perform indirect tensile strength test of bituminous specimens.
The machine comprises of a robust, compact two column bench type compression frame with adjustable upper cross beam. Motor, worm gear system and U-Touch PRO Control Unit are housed within the base unit.For safety, up and down travel of the lower platen is limited by limit switches mounted on the gear system. Rapid adjustment of the platen can be done by using the up and down buttons located on the front panel. The machine can be hand operated by a lateral hand wheel for calibration purposes.
Breaking head/s, indirect tensile strength test jig/s and computer should be ordered separately.
UTAS-1063 supplied with a pair of Ø100mm steel loading strip.Loading strips for Ø150 mm and/or Ø160mm and/or Ø4” and/or Ø6” specimens should be ordered separately.
UTAS-1066 supplied with a pair of Ø4” steel loading strip.Loading strips for Ø6” and/or Ø100mm and/or Ø150mm specimens should be ordered separately.
The Automatic Marshall Stability Test Machine is supplied complete with;
