Model WP-D10U
Water Supply Requirement Tap water: TDS<200ppm; Water pressure >0.1Mpa; Water temperature: 5-45℃
Pure Water Quality Conductivity 0.1us/cm (25℃)
PH value (25℃) None
Oxidizable (Calculated as O) Technical requirements: ≦0.08mg/L;
Test results: ≦0.08mg/L
Evaporation Residue (105±2℃) Technical requirements: ≦1.0mg/L;
Inspection results: 0.7mg/L
Inspection Basis GB/T6682-2008
Consumption 25W
Water Output Speed 10L/h
Control System Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System Pretreatment unit, external softening filter (recommended in places with high raw water hardness);
1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit American original RO reverse osmosis membrane/membrane group
Post Purification Unit Purification column
Standard Accessories Host + accessory package + 3.2G pressure barrel
External Size(WxDxH)(mm) 340x460x480mm (Water Purifier)
245x245x390 (Pressure tank)
Shipping Size (WxDxH)(mm) 535x435x550mm (Water Purifier)
245x245x360mm (Pressure tank)
N.W/G.W 23kg/25kg (Water Purifier)
2kg/3kg (Pressure Tank)
