The automated sample concentrator eliminates cumbersome manual operations and achieves efficient and accurate sample concentration by automating the workflow. It saves time and workforce, allowing you to focus more on the critical steps of your experiment. Intelligent programs and programmable options allow for flexibility and ensure a high degree of control over your experiments. Whether you are concentrating proteins, nucleic acids or other target substances, the fully automated sample concentrator can easily meet different experimental needs.
Sample Concentrator Specifications:
Model SC-1001
Temp. Setting Range 0℃-160℃
Temp. Range RT.+5°C-160°C
Temp. Accuracy ±0.5℃ (At 40℃)
±1℃ (At 120℃)
Temp. Uniformity ±0.5℃
Display Accuracy 0.1℃
Time Range 1-99h59min
Heating Time ≤15min (From 25℃ to 160℃)
Needle Length 150mm
Nitrogen Flow Rate 15L/min
Max Gas Pressure 0.02Mpa(Gas pin≤16pcs)
0.05Mpa(Gas pin＞1pcs)
Block Qty 1
Max Consumption 300W
Power Supply AC220/110V, 50/60Hz
Size (W×D×H)(mm)(Without the Heating Block) 260x220x450
Shipping Size(W×D×H)(mm) 450x440x360
N.W./G.W. (kg) 7/10
Optional Blocks
Model Tube diameter Tube quantity
MD03 10mm 24
MD04 12mm 24
MD05 13mm 24
MD06 15mm 16
MD07 16mm 16
MD08 19mm 12
MD09 20mm 12
MD10 26mm 8
MD11 28mm 4
MD12 40mm 3
MD15 1.5ml(centrifuge tube) 24
MD16 2.0ml(centrifuge tube) 24
Sample Concentrator Feature:
1. The wide range of temperature settings is suitable for a variety of laboratory applications, including sample concentration, evaporation and other experimental needs.
2. Uniform heating improves the repeatability and accuracy of experiments
3. The heat conduction medium adopts high-purity aluminum instead of the traditional water bath device, which makes the heating time shorter and the experiments more efficient.
4. Time and air volume can be adjusted to improve the flexibility of the experiment.
5. Equipped with nitrogen flow control and maximum air pressure parameters, it suitable for experiments requiring atmosphere control, such as sample concentration under inert atmosphere.
6. Blow a large number of samples at once; Individual blowing of each sample.
7. Needle length of 150 mm for different sample containers.
8. Supports 1 to 2 heating blocks, providing greater experimental capacity and flexibility to meet the needs of different sizes and types of experiments.
