This 3-in-1 soil tester requires no batteries and is plug-and-play. It can measure soil pH, soil moisture, and soil fertility.
To use, insert the probe into more than two-thirds of the soil and take a reading every 3 seconds. If you encounter resistance, try again in another location. Slide the switch and check the 'Soil Moisture / Soil Fertility / PH' result in the display window.
1. Moisture: Turn the instrument's knob to MOIST, MOIST is the moisture switch, the moisture corresponding to the instrument, the left side is dry, the right side is wet.
① Values 1-3 (red part) indicate that it is dry and needs
watering.
② Values 4-7 (green part) indicate that the moisture level is
appropriate, adjust the watering time according to the plant type.
③ Values 7-10 (blue part) indicate that the red part is too wet.
WARNING:
DO NOT TEST WITH WATER
DO NOT FORCE ON HARD SOIL OR HARD OBJECTS
DO NOT TEST WITH SYSTEMS
Insert the probe firmly, not loosely.
2. PH: What does our PH meter provide? pH Range: 0-8 pH
0-4 Strongly Acidic
5-6 Mildly Acidic
7 Neutral
8 Mildly Alkaline
A pH higher than 8 will not provide a result
Pay attention to the following tips when performing a pH test:
1. Make sure the soil is moist but not wet
2. Make sure the probe goes in at least 2.5 inches
3. Most soil or mixed soil in your home garden
purchased from the market, are slightly acidic to neutral,
Already suitable for your garden needs
3. Soil Fertility: Set the button on the device to Soil Fertility
①Soil Fertility weakly points to the left (yellow part)
②Soil Fertility properly points to the midpoint (green part)
③Excessive Soil Fertility indicator points to the right (red part)
